Smart Access Hub

controller-duo.png

The Smart Access Hub is available in two different models: 3 port & 6 port Hubs. 

 

Each hub has two independent channels and is customizable with preloaded software to configure to suite your needs. 

 

There are two primary modes, Lock and Light modes. The hubs are loaded with software to enable the customizations during initial setup.

 

Lock Mode: In this mode the Hub functions as a Cabinet Management System that can keep track of users whom had access via the Biometric Fingerprint Sensor. The Admin Portal allows the user to set up the Hub settings and keep track of Access Logs.  

 

In Lock Mode, the 3 port hub can be customized as follows: up to 3 locks or up to 2 locks and 1 light and the 6 port hub can be customized as follows: up to 6 locks or up to 5 locks and 1 light. In this mode the light is optional.

 

Light Mode: In this mode the Hub functions as a Sophisticated Lighting System that has the capability of securing one storage compartment with a lock. Under this mode, the finger-touch sensor operates as a digital touch switch where anyone can turn the lights on or off, but if there is a lock, only the registered fingerprints can unlock the lock. To select this mode of operation the user selects this mode during the initial set up of their new device.  

 

In Light Mode, the 3 port hub can be customized as follows: up to 3 lights or up to 2 lights and 1 lock, and the 6 port hub can be customized as follows: up to 6 lights or up to 5 lights and 1 lock. In this mode the lock is optional.

In addition locks and lights can be combined when the user intends to light the cabinet when it unlocks and turn off the lighting when it re-locks. When intended to use in this manor the hub must be set in lock mode. Lock models: LSA-01-00, LSA-02-02 and LSA-03-00 can be used under this configuration.

 

Hubs are WiFi and Bluetooth enabled and can be controlled remotely via cloud and Alexa voice command if the user desires to use that feature.

An admin can set up access times and keep track of Name, Date and Time Stamp when using the Finger Touch Sensor to unlock the locks.

 

The Smart Access Technologies Plus App is available to download for free on the App Store and Google Play.

*Locks, Lights & Finger Touch Sensor sold separately. *

 

Requirements for installation:

  • Designed for Wood, Wood Products, Composite, Plastic & Glass Cabinets and Furnishings 

  • Drill Bit 25MM for Finger Touch Sensor Installation for thick wood a 35MM flat bottom drill bit is required to be able to properly screw the nut and secure the sensor

  • Access to power adapter DC Jack is required in the event of Electrical Power failure, the provided emergency usb power cable can be used to operate the system during electrical power outage. 

What's Included:

Every Electronic Controller includes a DC to USB adapter which can be used in the event there is a power outage, just plug the DC end to the hub and the USB end to an external cellphone battery bank. Also included are, power adapter, and mounting hardware.

Product Specs:

Bluetooth and WiFi 

Low Voltage

Dimensions: Length:5.5", Width: 3.9", Depth: 1.2"

CE, RoHS, FCC

LSA-01-00

lock-2_edited.jpg

The Smart Access Electronic Locks are designed to work with the Smart Access System.  Supplement the Smart Access System with additional locks or customize the Controller Kit with the number of locks you need to fit your project.

These locks have an external sensor that activates an audio alert after the time set for the locks to remain unlock expires when the door or drawer has not properly closed, has been left or forced open. This feature can be turned on in the app.

This lock unlocks when power is applied and re-locks when power is removed.  You can select between 1-10 minutes to leave the locks unlocked. You can re-lock the locks right away by closing the door or drawer and either re-locking them through the biometric fingerprint sensor or the app.

What's Included

The Electronic Lock includes: Position Sensor, Latch, Installation Template, Mounting Hardware, and Spare Connector

Product Specs

Low voltage

Dimensions: Length 3.5” / Width 1.15” / Depth 1.10”

Wire Length 24”

CE & ROHS

LSA-02-02

blk 6_edited.jpg

Smart Access Pop-Out Rotary Locks come with a removable cover. The purpose of the cover is to aid installation on wood. If the intent is to install the locks on metal the cover can be removed.

 

These locks are certified to hold up to 569 pounds of force. When unlocking, these locks pop out the door or drawer so we recommend not using more than 2 locks per system, one per channel. These locks are IP 67 certified which means they are dust proof, dirt proof and waterproof for up to 30 minutes under 3 feet of water.

 

They have an internal position sensor that can notify the user if the lock is unlocked after the preset time between 1-10 set by the user minutes has expired. These locks will lock as soon as you close the door or drawer so the re-locking function of the app and biometric sensor does not apply to this particular lock.

What's Included:

The Pop-Out Rotary Lock includes: Lock, Latch and Mounting Hardware.

Product Specs:

Low Voltage

Dimensions with Cover: Length:2.75", Width: 4", Depth:0.7 "

Dimensions without Cover: Length:2.75", Width: 2.67", Depth:0.5 "

Wire Length: 6 ft

CE, RoHS, FCC

LSA-03-00

LSA-03-00 B.png

The Smart Access High-Strength Bolt Locks are certified to withstand598 pounds of pull force.

These locks unlocks when power is applied and re-locks when power is removed.  You can select between 1-10 minutes to leave the locks unlocked. You can re-lock the locks right away by closing the door or drawer and either re-locking them through the biometric fingerprint sensor or the app.

These locks are designed to work with Smart Access Controllers and can work in combination with other Smart Access locks and or lights.

What's Included:

High Strength Bolt Lock includes: Lock, Latch and Mounting Hardware.

Product Specs:

Low Voltage

Dimensions: Length:3.6", Width: 1.2", Depth:1.1 "

Wire Length: 6 ft

CE, RoHS

blk 6_edited.jpg

LSA-04-00

Smart Access Toggle Rotary Locks come with a removable cover. The purpose of the cover is to aid installation on wood. If the intent is to install the locks on metal the cover can be removed.

 

These locks are certified to hold up to 569 pounds of force. When unlocking, these locks can remain unlocked for indefinite length of time until the user decides to lock them back. These locks are IP 67 certified which means they are dust proof, dirt proof and waterproof for up to 30 minutes under 3 feet of water.

 

They have an internal position sensor allowing the user to know if the door or drawer is unlocked through the app.

What's Included:

The Toggle Rotary Lock includes: Lock, Latch and Mounting Hardware.

Product Specs:

Low Voltage

Dimensions with Cover: Length:2.75", Width: 4", Depth:0.7 "

Dimensions without Cover: Length:2.75", Width: 2.67", Depth:0.5 "

Wire Length: 6 ft

CE, RoHS, FCC

LTS-01-00

3 light combo 2.png

The Smart Access Controllers are capable of controlling both locks and lights. Lights can be controlled independently or in conjunction with locks. 

Our high quality puck lights can be either surface or recessed mounted. Lights are  made of CNC aluminum and are dimmable. You can set the length of time you want the lights to remain on before turning off automatically (up to 24 hours).

These lights are available in 3 different colors, black, silver and white and are designed to work with Smart Access Hubs with or without locks. 

What's Included:

One Puck Light and Mounting Hardware.

Product Specs:

Low Voltage

Dimensions: Height/Surface Mount: 0.6" Width: 2.7"

Wire Length: 8 ft

Beam Angle: 120

Total Wattage: 3

Color Temperature: 4000 K

CE, RoHS, ETL

FSA-01-00

ft slight side_edited.png

The Biometric Fingerprint Sensor is a high-quality high security capacitive fingerprint module. It is capable of recording up to 200 fingerprints. 

It has very fast scan speed and is extremely accurate. Depending on the setting set up in the admin portal page, the fingerprint sensor can control both channels simultaneously or independently with one fingerprint. 

Under Light Mode, the sensor operates as a digital touch switch where anyone can touch the sensor and the lights will turn on or off. If a lock is used under this configuration, only a registered fingerprint will unlock the lock.

This sensor has an abrasive resistance of 1 million uses and can be whipped with isopropyl alcohol.

What's Included:

1 Biometric Fingerprint Sensor and Mounting Hardware

Product Specs: 

  • Housing made of Stainless Steel 

  • Face diameter is 1.1 in

  • Threaded portion diameter is 0.98 in

  • Threaded portion Length is 0.65 in

  • Standard wire length is 3 ft. 8 ft extensions sold separate. 

 

Requirements:

Requires a drill bit of 25mm for Installation